Вакансия № 7053976 на должность "QC Coating and Insulation Inspector" в городе (регионе) Атырау, Казахстан от компании "Career Holdings, Personnel Recruitment Centre" на сайте Электронный Центр Занятости Населения
Уважаемый соискатель вакансий, Вы можете перейти на сайт прямого работодателя "Career Holdings, Personnel Recruitment Centre" для ознакомления с информацией о компании (фирме, организации, ИП). Смотрите Веб-сайт "Career Holdings, Personnel Recruitment Centre" - http://www.career-holdings.kz
| Логотип (торговая марка, бренд, эмблема, внешний вид здания или внутренний интерьер офиса): |  |
Организация работает в следующих сферах деятельности: Услуги для бизнеса; .
Репутация компании "Career Holdings, Personnel Recruitment Centre" в отзывах работников:
Читайте свежие отзывы сотрудников об этой организации.
Оставить мнение об этом работодателе без регистрации бесплатно.
Обязательное требование к опыту работы искомого сотрудника: не требуется.
График работы: полный день.
Тип занятости: полная занятость.
Вакансия № 7053976 добавлена в базу данных: Четверг, 4 апреля 2024 года.
Дата обновления этого объявления: Пятница, 26 апреля 2024 года.
| Рейтинг вакансии: 12,86 из 100 баллов |
Работодатель предложит заработную плату по результатам собеседования с соискателем работы.
Roles and responsibilities
• Inspection of all Blasting & Painting Activities carried out at Work shop as well as on Site at every step.
• Review and preparation of ITP.
• Performing and reviewing all sorts of test (Instruments) as per ITP.
• Reporting observation of Corrosion/ Petting’s to Client for the remedial actions.
• Inspection of all incoming materials related to Blasting & Painting activities.
• Weather Monitoring and recording (Air Temperature, Relative Humidity, Dew point, etc).Checks and records atmospheric conditions prior to starting of painting operations.
• Verification of Batch Certificates of Abrasives & Paints, Calibration certificates of all Instruments / Equipments.
• Verify the Cleanliness of surface area.
• Verify the qualification of Blaster/Painters.
• Anchor Pattern/Profile check of the blasted surface and ensure profile is
as per project specification.
• Ensure traceability of the Material at all stages of Painting and during blasting.
• Verify Soluble Salt Contamination on Blasted surface using.
• Ensure mixing and thinning as per Manufacturer's Technical Data Sheet.
• Inspection of Airless Spray applications.
• Inspection of coatings before, during and after application.
• Ensure painters using proper Tip sizes during application as per
Manufacturers recommendations.
• Monitor Induction Time, Pot life and continuous agitations whenever required.
• Ensuring DFT & WFT of various coating system is as per project specification.
• Inspection of various types of coatings.
• Inspection of various coating failures at all stages.
• Recording all rejection, corrective action and preventive action.
• Auditing Instruments calibration and maintain Calibration status.
• Ensure degree of curing of coatings at each stage and ensure overcoat intervals
• Ensure touch up works carried out fully in site prior to final inspection.
• Maintain records of all work done. Including Painting Reports, RFI's, Painting Release reports, Insulation Reports, Materials Inspection certificates, Material Inspection reports etc.
• Maintain Daily Activities and Reports
• Painting Test packs preparation and review.
• Prepare and Review QC Dossier for Painting/Coating.
• Coordinating with the Clients for final inspection and obtaining the reports getting signed by the clients when ever required.
• Executes the specific inspections on materials, equipment and construction/installation activities on site.
• Issues the relevant Quality Records and, when necessary, write and send to Quality Control Supervisor non-conformances reports.
• Control of storage and certification of consumables.
• Performs qualifications of coating processes. .
• Carries out wet and dry film thickness checks.
• Monitors observations of the correct coding cycles.
• Verifies the correct colour-coding and painting.
• Performs visual checks after blasting.
INSULATION ACTIVITIES:
• Review and approval of Material approvals of Insulation materials.
• Preparation of ITP, Method Statement for Insulations.
• Review all activities such as Hydro test, Painting and Mechanical completions prior to Insulation releases for Lines.
• Verifying PUF materials are stored according to data sheet specified temperatures.
• Conducting a qualification test for Polyurethane Foam (PUF) applicator.
• Conducting Visual inspection of PUF Thickness and their failures.
• Inspections of PIR (for Cold insulation) and application of Vapor Barrier’s.
• Verify thickness and other requirements during Insulation
• Cryolene Wool Installation in the tanks suspended deck
• Cladding sheet installation, SS band fixing.
• Inspection of all joint sealants after cladding works. Carryout Final Inspection of Insulations.
Rotational - 28/28
Разместить Ваше резюме сейчас ...
Написать в компанию ...